How to measure for dovetail drawer boxes

Getting the sizes right is the most important step before you order. J&B Woodcrafts builds custom hardwood dovetail drawer boxes to the width, depth and height you give us, in our shop in Statesville, NC. We typically build in about a week, deliver across most of the Piedmont, and ship nationwide by UPS, FedEx or LTL freight.

This guide explains how to measure a cabinet opening, how that differs from the finished box size, and what to send us so the drawers fit the first time. If you can draw it, we can build it.

Outside size vs. the cabinet opening

We cut each box to the exact width, depth and height on your list. Those numbers should be the outside size of the finished dovetail drawer box — the overall width from outside face to outside face, the overall depth from the front of the box to the back, and the overall height from the bottom edge to the top edge.

That is not always the same as the cabinet opening.

- If you are replacing a box that already fits, measure the outside of that box. Those are the sizes we need.

- If you are building new, measure the cabinet opening, then size the box from the slide you plan to use. The slide maker’s instructions tell you how much to subtract from the opening width, and what box depth matches the slide length.

- If you’d rather not do the math, send us the opening width, depth and height plus the slide brand and model (for example Blum undermount, or full-extension ball-bearing side mount). We can help turn that into a box size.

Don’t guess at clearances. A box that’s a fraction of an inch too wide will not go in, and a box that’s too narrow can look loose or not clip onto undermount slides the way it should.

How to measure width

Width is left to right.

For an existing box, measure the outside width across the front, from the left outside face to the right outside face. Measure in more than one spot if you can, and use the largest number if they differ.

For a cabinet opening, measure the clear opening from left to right, inside the face frame or between the cabinet sides, at the spot where the drawer will run. Then apply the slide maker’s width deduction. Undermount slides and side-mount slides do not use the same deduction, and the side thickness of the box can change it too. Our hardwood boxes are 5/8" sides. Baltic birch plywood is offered in 5/8" or 1/2", bullnosed.

If you already know the finished outside width you want, that’s the number to enter when you order.

How to measure depth

Depth is front to back.

For an existing box, measure the outside depth along the side, from the front of the box to the back.

For a cabinet opening, measure from the front of the cabinet (or the back of the face frame, depending on how the slides mount) to the inside of the cabinet back. The finished box depth usually matches the slide length, and you need a little room behind the box for the slide hardware. Common slide lengths in the trade are 9", 12", 15", 18", 21" and 24", with longer slides available for deeper cabinets. Kitchen base cabinets often take a 21" undermount slide; vanities often take an 18" slide. Those are common setups, not a required size — we build the depth you need.

Check the slide instructions for rear clearance, especially if you use a rear mounting bracket.

How to measure height

Height is bottom to top.

For an existing box, measure the outside height from the bottom edge of the sides to the top edge.

For a cabinet opening, measure the clear opening from the bottom of the opening to the underside of the rail or stretcher above it. The box needs to be shorter than that opening so it can go in and out without rubbing, and undermount slides need extra room below the box for the slide mechanism. How much you subtract depends on the slide. When in doubt, send us the opening height and the slide and we’ll help.

If the drawer sits behind a separate drawer front, the box height is independent of the drawer-front height. Order the box height that works with your slides and your opening, not the height of the front.

Inside vs. outside dimensions

Unless you tell us otherwise, the sizes on your list should be outside dimensions.

Inside dimensions are smaller, because they don’t include the wood:

- On a box with 5/8" sides, the inside width is the outside width minus 1-1/4" (5/8" on each side).

- On a box with 1/2" sides, the inside width is the outside width minus 1".

- Inside height also depends on the bottom thickness and the recess — how far up the bottom sits from the bottom edge of the sides.

We offer 1/4", 3/8" and 1/2" bottoms. A 1/2" recess is our standard, and it is what many Blum undermount setups need, but we can do flush, 1/4", 3/8" or another recess if you need it. If you care about how much usable space is inside the box, tell us that and we can work back to the outside size.

File drawers, trash pull-outs, spice drawers and other specialty boxes may need extra notes — file rail spacing, bin size, or a plumbing cutout — besides the basic width, depth and height.

Standard sizes and minimums

We don’t sell a fixed chart of stock dovetail drawer boxes. Every box is cut to the sizes you send. There is no minimum order: we build one drawer or a whole kitchen.

We also don’t publish a single “smallest box we can make,” because it depends on the style, the wood, and whether you need notch and bore, a scoop, file rails or another option. If you can draw it, we can usually build it. If a size is too tight for the option you want, we’ll tell you before it goes into production.

When you measure, write each box as width × depth × height, and say that those are outside dimensions. Add the wood, the line (our regular Dovetailed Drawer Line, or the Economy Line), assembled or unassembled, finished or unfinished, bottom thickness, recess, and any slide prep.

What affects the price

The price of custom dovetail drawer boxes comes from the choices on your list, not from a one-size price tag. What usually changes the quote:

- Size, especially width, depth and height

- Wood and thickness — solid hardwoods such as maple, natural maple, basswood, black walnut, red oak, rift and quartered white oak and cherry in 5/8", or bullnosed Baltic birch plywood in 5/8" or 1/2"

- Our regular Dovetailed Drawer Line (corners sanded smooth and sealed with two coats of protective clear coat) versus the Economy Line (the same strong drawer box at a lower price, with unsanded dovetail corners and a shorter lead time)

- Specialty work, such as roll-outs, double deckers, file drawers, trash pull-outs, plumbing cutouts, corner drawers, dividers, ears or spice inserts

- Notch and bore for undermount slides, clips, assembled or unassembled, and with or without a bottom

- Finished or unfinished (Black Walnut is finished)

- Laser engraving, which has a charge

- Rush, when you need the order sooner than our typical lead time of about a week

Once your account is set up in our online ordering portal, you can enter the sizes and options and see the price right away. Quote requests sent another way are answered within 24 hours.

Ready to order

If your list is ready, order online for instant quotes after your account is verified, or get a quote and send us the openings or the finished box sizes. You can also call (704) 278-1645, Monday to Friday, 8 to 5.

Compare woods on our Types of Wood page, and slide prep, bottoms and scoops on Options.